Wind Average Drag

Wind Average Drag Value

This function will calculate the wind average drag value based on your data.

  • Click on Plots at the top middle navigation bar

Note: You will need to be in the Project Summary to access Plots. Click on the project name at the top left navigation bar to return to the Project Summary

  • Enter yaw (deg) and CD.
  • Enter Truck Speed and Cross Wind Speed. The Truck Speed does not have to be at the same speed you ran your simulations. The units of measure for the Truck Speed and Cross Wind Speed does not matter but both have to be consistent.
  • Click Save

A plot of your data along with the wind averaged coefficient will download.